Guangdong Association Public Intelligent Technology Co., Ltd.
Tel. : +86-0769-8287-9459
+86-136 3176 9379
+86-134 5002 8260
Fax. : +86-0769-8902-6009
E-mail : firstname.lastname@example.org
After-sales service: 400-8328-098
Source：Release Time：2017-11-02 09:28:55Click Rate：
First, open the front lid of the sawing machine to participate in 32 # (46 # summer wear-resistant hydraulic oil, high oil filter to the limit.
Second, to the sawing machine water tank, the water level to the bed after the pump suction port upper limit.
Third, close the sawing machine circuit breaker switch, unscrew the total stop switch, the oil began to work, turn the speed control switch counterclockwise to the slowest stop, open the switch up.
Fourth, let the sawing machine beam up to the highest position, and then open the job switch, saw the beginning of the wheel rolling, especially tips, saw wheel and saw counterclockwise rotation is positive, test the end of the total stop switch.
Fifth, open the saw blade wheel, hanging saw blade, saw blade pulley on the edge of the need to rely on.
Six, the saw blade is necessary to put the guide head, screw the handle pulley, tensioning saw blade, saw blade tension to the ineffective stop hand pressure.
Seven, according to the width of the workpiece sawing machine, adjust the left guide arm, right guide arm can not move, the factory has been adjusted, the guide head from the workpiece 20mm for the best.
Eight, turn the saw to turn the valve to release the file, put the workpiece into the workpiece quickly turn file, the workpiece quickly.
Nine, open the job switch, saw wheel rotation, rotate the speed switch, adjust the saw feed speed (the new saw blade can not be too fast, to be grinding in for some time before adding the sawing speed).
Ten, press the sawing machine control valve, the saw frame to reduce agility, to be close to the workpiece when the saw blade to stop, the beginning of feed sawing, sawing the end of the saw blade initiative to suspend, and saw the initiative to rise.