Sawing machine Note:
a, with a sawing band should avoid too much lost interface, as much as possible in the same interface welding, before welding before the weld should be around the 3mm or so.
b, according to the company's experience, the vast majority of factors poor welding is not familiar with man-made operation, so the welding operation often practice.
c, welding, such as rocker can not clamp saw band, then the first set of screws to relax, and then use the word screwdriver to adjust the rotation of the spindle to the clamping point of view.
Saw welding machine:
a, rotate the pressure adjustment knob.
b, rotation azimuth band saw press every 2mm pressure adjustment knob into the 1 scale of the share.
c, press the welding switch, press the bottom once, about 3 to 6 seconds to waver.
d, first pressure to adjust the button to zero position.
e, Saw belt polished at both ends, sealed Qi, close contact, rocker clamp.